|
• pH Meter
• Moisture Meter
• Light Meter
The best way to ensure your plants reach their full potential is by determining if you have the proper soil conditions. The Harvest pH Meter not only indicates the amount of alkalinity or acidity in the soil, but also measures moisture content and light amounts.
|
|
Set the button on the front of the meter to the desired measurement setting for pH, Moisture or Light. Insert the probes approximately 6 inches into the soil. Wait one minute and then take reading. Use these measurements as a guide to create the proper soil conditions for your plantings.
|
|
|
Gives immediate indication of acid or alkaline soil condition
|
 |
pH Readings |
|
(How to increase accuracy)
To best measure the alkalinity or acidity of your soil, you need to achieve a moisture reading of more than 7. Check the pH after rainfall or wet the soil with a natural water source. Most plants respond best with a pH above 6.0 and below 8.0, but it is always best to check the specific recommendations for your plants.
It is also important to remove oxidation from both rods with a scouring pad before using. (Note: Probe tips are delicate... do not scour tips; use soft cloth to wipe them clean) |
|
|
|
;)